BHDKN - HEAT RESISTING ENAMEL BLACK 17038
- MSDS: BHDKN
- Manufacturer: EVERSEAL MANUFACTURING CO INC
- Product Name: HEAT RESISTING ENAMEL BLACK 17038
- National Stock Number: 8010-00-297-2013
Product Identification
Product ID:HEAT RESISTING ENAMEL BLACK 17038
MSDS Date:05/12/1987
FSC:8010
NIIN:00-297-2013
MSDS Number: BHDKN
Responsible Party
RIDGEFIELD, NJ 07657
US
Emergency Phone: 201-943-4986
Cage: EO432
Contractor
Telephone: 201-943-4986
Cage: 72988
Ingredients
RESIN
Fraction By Weight: 49%
OSHA PEL NA
ACGIH TLV: NA
CARBON BLACK
CAS: 1333-86-4
RTECS: FF5800000
Fraction By Weight: 2%
OSHA PEL 3.5 MG/M3
ACGIH TLV: 3.5 MG/M3; 9192
MINERAL SPIRITS
CAS: 64475-85-0
RTECS: PY8240000
Fraction By Weight: 47%
ADDITIVES
Fraction By Weight: 2%
OSHA PEL NA
ACGIH TLV: NA
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Effects of Overexposure:INHALATION:DIZZINESS,NAUSEA,POSSIBLE
UNCONSCIOUSNESS.IRRITATION TO SKIN & EYES.
First Aid
First Aid:INHALATION:REMOVE TO FRESH AIR,APPLY ARTIFICIAL RESPIRATION
IF NECESSARY.EYES: FLUSH W/WTR.SKIN:WASH W/SOAP & WTR.CONSULT
PHYSICIAN.
Fire Fighting
Flash Point:105F 40.56C
Upper Limits:1
Extinguishing Media:FOAM, CARBON DIOXIDE CO2, DRY CHEMICAL
Unusual Fire/Explosion Hazard:WATER NOT A SUITABLE EXTINGUISHING
MEDIUM.FIREFIGHTERS SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS.
Accidental Release
Spill Release Procedures:REMOVE IGNITION SOURCES.ENSURE ADEQUATE
VENTILATION.ABSORB SMALL SPILLS ON DRY ABSORPTION MATERIAL. USE
SPARK - PROOF SCOOP FOR LARGER SPILLS.
Handling
Handling and Storage Precautions:AVOID EXCESSIVE HEAT & OPEN IGNITION
SOURCES.
Other Precautions:NPCA/HMIS RATING 3,2,O,H
Exposure Controls
Respiratory Protection:IF TLV MAY BE EXCEEDED,USE CARTRIDGE FUME MASK.
Ventilation:SUFFICIENT TO ENSURE LEL NOT ACHIEVED.
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES
Other Protective Equipment:PROTECT SKIN W/CLOTHING OR BARRIER CREAM.
Supplemental Safety and Health
NK
Chemical Properties
HCC:F4
Boiling Pt:B.P. Text:323 - 390F
Vapor Density:>AIR
Evaporation Rate & Reference:
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:NA
Hazardous Decomposition Products:CARBON MONOXIDE &/OR CARBON DIOXIDE ON
COMBUSTION
Disposal
Waste Disposal Methods:DISPOSE OF AS PER LOCAL & FEDERAL REGULATIONS
FOR HAZARDOUS WASTE.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.